App setup

HDX2 app setup

How do I pair dbell with a new Router

If you are going to upgrade or change the router, but keeping the same SSID and password, dbell will work with the new router without having to redo the setup.

If you are changing the SSID or password of your Network or for any other reason if dbell doesn’t work with the new Router, please follow the simple steps below:

  1. Reset dbell
  2. Setup new router
  3. ‘Delete’ dbell from dbell app (Edit >> Delete)
  4. Pair dbell with your app again. Add device >> One-Touch setup >> Follow the app instructions

1. How to Reset dbell:
You can reset dbell in 3 different ways:

  1. Reset dbell HD live from app: (when dbell is online)
  2. Reset dbell HD Live from Browser: (when dbell is online)
  3. Hard Reset dbell HD Live: (when dbell is offline)
  4. Call Tech support to reset dbell

1. Reset dbell HD live from app: (when dbell is online)

  • Open dbell HD live app
  • When device is online >>Go to Setup >>Tap “Restore factory default or Reset”

2. Reset dbell HD Live from Browser: (when dbell is online)

  1. Type dbell IP address in the browser address bar, example, http://192.168.1.100:81 where 192.168.1.100 is the IP address, 81 is the port. To Find dbell IP > Go to ‘Setup’ >> ‘Network Info’
  2. When asked for Authentication, type User name:  and Password.
  3. Select “Videostream mode” if your default browser is Chrome, Firefox or Safari
  4. Select WRENCH icon to access dbell HD live ‘System settings’
  5. Go to menu ‘User & Device manager
  6. Click ‘Maintain
  7. Click ‘Restore Factory Settings
  8. Do not close Browser, Wait until the countdown process is complete
  9. Sync dbell with app using One-Touch setup or LAN Search

3. Hard Reset dbell HD Live: (when dbell is offline)

  1. Unplug indoor bell from power outlet
  2. Now Press and hold the call button until you hear “RESET SUCCESSFUL”, time varies with firmware ver. Use the stop watch on your smartphone to keep track of time. It could be 90 seconds to 333 seconds.
  3. Once reset is successful, dbell will reboot. Wait until the booting process is compete (approx. 55 seconds)
  4. Open dbell app. Sync dbell with app using One-Touch setup

4. Call Tech support to reset dbell

Call us at  (800) 944 8218 or 1 (905) 582 8755. (9am – 9pm EST)

Back To Top

How to add or remove micro SD card

Micro SDHC card is located just below the white connector at the back of dbell.

To remove micro SD card follow the simple steps below:

    1. Pull the cover down as shown by the arrow
    2. Push the card to release
    3. Once the card is released, pull the card to remove
    4. Place the cover back to its place

add sd card 2
1. Pull the cover down as shown by the arrow

ad sd card 3
2. Push the card to release

add sd card 4
3. Once the card is released, pull the card to remove

To add micro SD card follow the simple steps below:

    1. Pull the cover down as shown by the arrow
    2. Push the card into the slot carefully
    3. Once the card is inserted, place the cover back

Back To Top

HDX2 app setup

dbell HD live/X2 app setup can be done two ways:

  1. Wireless setup
  2. Ethernet setup

1. Wireless setup:
dbell app uses device speaker to send encrypted Wi-Fi information to your dbell unit.

For successful please follow few simple steps:

  • Smartphone / tablet is close to dbell
  • iPhone ring/silent toggle on the top of the left edge of the phone is flipped to ring (red dot not visible)
  • Do not make/receive call on same phone in setup
  • Disconnect hearing aids / headphones for setup
  • Do not play music on the same phone in setup

01d_Setup_One-touch_Step3

2. Ethernet setup:

For Ethernet setup,

  1. Connect dbell to your router/switch via an Ethernet cable
  2. Power up dbell
  3. Follow app on screen instructions

Back To Top

View dbell on TV

To view dbell Live/X2 video stream on TV, there are few options:

  1. Smart TV Running Android OS
  2. TV with Amazon fireTV stick
  3. TV with a browser
  4. TV connected to an NVR (Network Video Recorder)

1. To view your dbell live stream on any smart TV Running Android OS

  1. Download and open dbell TV app from Google play store or Amazon app store
  2. Follow on-screen easy setup
  3. Enjoy viewing live video stream from your local dbell and from remote dbell like viewing your cottage dbell

viewONtv-browser1

2. To view your dbell live stream on any TV with Amazon fireTV stick:

  1. Download and open dbell TV app from Amazon app store
  2. Follow on-screen easy setup
  3. Enjoy viewing live video stream from your local dbell and from remote dbell like viewing your cottage dbell

viewONtv1

3. To view your dbell live stream on any TV with a browser:

  1. Open your dbell HD Live app and go to “Setup” of the doorbell you wish to stream on your TV.
  2. Go to “Network Info” on the dbell app
  3. Write down the “IP address” that is displayed on the screen
  4. Turn on your Smart TV and open the browser
  5. Type in the “IP address” that you wrote down and type it in the search bar of the browser (make sure to put :81 at the end)
  6. After pressing enter, you will be prompted to enter the “Username” and “Password of your doorbell, and after inputting the correct information, you will see the live stream of your doorbell via your browser

viewONtvbrowser

4. To view your dbell live stream on any TV connected to an NVR (Network Video Recorder)

The instructions are based on ONVIF compatible NVR. For your particular NVR it could be a little bit different setup, but the process is similar to adding an IP camera to the NVR

  1. In dbell app go to SETUP>> Network Info >> Write down the dbell IP address
  2. Go to your NVR setup screen, follow the NVR instructions on adding IP camera
  3. Select add IP camera
  4. Enter the dbell IP address found on Step-1
  5. Select ONVIF protocol, Port # 10080
  6. Press OK.
  7. dbell HD live is added to your NVR.

nvr

If you have any issues with any of the above setup, email us to: support@dbell.ca or call us.

 

Back To Top

HD Live app setup

Phone change

I have changed my phone. How do I pair dbell with my new phone?

  1. Download dbell HD Live app
  2. Open dbell app
  3. Press ‘Add Device’
  4. Select LAN search
  5. Select the dbell shown on the search result
  6. Enter user name and password
  7. Press ‘Done’

Congratulation! you have added dbell to your new phone

Back To Top

How do I pair dbell with a new Router

If you are going to upgrade or change the router, but keeping the same SSID and password, dbell will work with the new router without having to redo the setup.

If you are changing the SSID or password of your Network or for any other reason if dbell doesn’t work with the new Router, please follow the simple steps below:

  1. Reset dbell
  2. Setup new router
  3. ‘Delete’ dbell from dbell app (Edit >> Delete)
  4. Pair dbell with your app again. Add device >> One-Touch setup >> Follow the app instructions

1. How to Reset dbell:
You can reset dbell in 3 different ways:

  1. Reset dbell HD live from app: (when dbell is online)
  2. Reset dbell HD Live from Browser: (when dbell is online)
  3. Hard Reset dbell HD Live: (when dbell is offline)
  4. Call Tech support to reset dbell

1. Reset dbell HD live from app: (when dbell is online)

  • Open dbell HD live app
  • When device is online >>Go to Setup >>Tap “Restore factory default or Reset”

2. Reset dbell HD Live from Browser: (when dbell is online)

  1. Type dbell IP address in the browser address bar, example, http://192.168.1.100:81 where 192.168.1.100 is the IP address, 81 is the port. To Find dbell IP > Go to ‘Setup’ >> ‘Network Info’
  2. When asked for Authentication, type User name:  and Password.
  3. Select “Videostream mode” if your default browser is Chrome, Firefox or Safari
  4. Select WRENCH icon to access dbell HD live ‘System settings’
  5. Go to menu ‘User & Device manager
  6. Click ‘Maintain
  7. Click ‘Restore Factory Settings
  8. Do not close Browser, Wait until the countdown process is complete
  9. Sync dbell with app using One-Touch setup or LAN Search

3. Hard Reset dbell HD Live: (when dbell is offline)

  1. Unplug indoor bell from power outlet
  2. Now Press and hold the call button until you hear “RESET SUCCESSFUL”, time varies with firmware ver. Use the stop watch on your smartphone to keep track of time. It could be 90 seconds to 333 seconds.
  3. Once reset is successful, dbell will reboot. Wait until the booting process is compete (approx. 55 seconds)
  4. Open dbell app. Sync dbell with app using One-Touch setup

4. Call Tech support to reset dbell

Call us at  (800) 944 8218 or 1 (905) 582 8755. (9am – 9pm EST)

Back To Top

How to add or remove micro SD card

Micro SDHC card is located just below the white connector at the back of dbell.

To remove micro SD card follow the simple steps below:

    1. Pull the cover down as shown by the arrow
    2. Push the card to release
    3. Once the card is released, pull the card to remove
    4. Place the cover back to its place

add sd card 2
1. Pull the cover down as shown by the arrow

ad sd card 3
2. Push the card to release

add sd card 4
3. Once the card is released, pull the card to remove

To add micro SD card follow the simple steps below:

    1. Pull the cover down as shown by the arrow
    2. Push the card into the slot carefully
    3. Once the card is inserted, place the cover back

Back To Top

HD live app setup

dbell HD live/X2 app setup can be done two ways:

  1. Wireless setup
  2. Ethernet setup

1. Wireless setup:
dbell app uses device speaker to send encrypted Wi-Fi information to your dbell unit.

For successful setup please follow few simple steps:

  • Smartphone / tablet is close to dbell
  • iPhone ring/silent toggle on the top of the left edge of the phone is flipped to ring (red dot not visible)
  • Do not make/receive call on same phone in setup
  • Disconnect hearing aids / headphones for setup
  • Do not play music on the same phone in setup

01d_Setup_One-touch_Step3


2. Ethernet setup:

For Ethernet setup,

  1. Connect dbell to your router/switch via an Ethernet cable
  2. Power up dbell
  3. Follow in-app instructions

Ethernet setup

Back To Top

View dbell on TV

To view dbell Live/X2 video stream on TV, there are few options:

  1. Smart TV Running Android OS
  2. TV with Amazon fireTV stick
  3. TV with a browser
  4. TV connected to an NVR (Network Video Recorder)

1. To view your dbell live stream on any smart TV Running Android OS

  1. Download and open dbell TV app from Google play store or Amazon app store
  2. Follow on-screen easy setup
  3. Enjoy viewing live video stream from your local dbell and from remote dbell like viewing your cottage dbell

viewONtv-browser1

2. To view your dbell live stream on any TV with Amazon fireTV stick:

  1. Download and open dbell TV app from Amazon app store
  2. Follow on-screen easy setup
  3. Enjoy viewing live video stream from your local dbell and from remote dbell like viewing your cottage dbell

viewONtv1

3. To view your dbell live stream on any TV with a browser:

  1. Open your dbell HD Live app and go to “Setup” of the doorbell you wish to stream on your TV.
  2. Go to “Network Info” on the dbell app
  3. Write down the “IP address” that is displayed on the screen
  4. Turn on your Smart TV and open the browser
  5. Type in the “IP address” that you wrote down and type it in the search bar of the browser (make sure to put :81 at the end)
  6. After pressing enter, you will be prompted to enter the “Username” and “Password of your doorbell, and after inputting the correct information, you will see the live stream of your doorbell via your browser

viewONtvbrowser

4. To view your dbell live stream on any TV connected to an NVR (Network Video Recorder)

The instructions are based on ONVIF compatible NVR. For your particular NVR it could be a little bit different setup, but the process is similar to adding an IP camera to the NVR

  1. In dbell app go to SETUP>> Network Info >> Write down the dbell IP address
  2. Go to your NVR setup screen, follow the NVR instructions on adding IP camera
  3. Select add IP camera
  4. Enter the dbell IP address found on Step-1
  5. Select ONVIF protocol, Port # 10080
  6. Press OK.
  7. dbell HD live is added to your NVR.

nvr

If you have any issues with any of the above setup, email us to: support@dbell.ca or call us.

 

Back To Top

HD+ app setup

HD+ app setup

Download and install “dbell HD+” app from the app store
Power-up dbell using DC adapter, wait for dbell to start and Welcome you.
dbell is now in quick configuration mode, light will be flashing.

Make sure your Smartphone or Tablet is connected to 2.4GHz WiFi

  1. Open dbell app, Tap ‘Add Device’
  2. Tap ‘SmartLink’
  3. Enter your ‘WiFi password’ carefully
  4. Tap ‘Start’. auto configuration will start, please wait until complete

If your WiFi password was entered correctly, dbell will connect to WiFi
and announce setup is successful Press the doorbell found
If nothing is visible, press ‘Refresh’

Troubleshooting Tips:

Trouble

Corrective Action

No lights at start up RESET dbell
No flashing lights upon power-up RESET dbell
Quick configuration doesn’t work RESET dbell
After setup is done nothing shows up Press REFRESH
NO announcement at the end of step (4) Start from Step (1)
System setting changes doesn’t work Re-start dbell after setting changes
Camera keeps showing offline on app Re-start dbell

How to RESET dbell HD+

  1. Use Reset Key from the dbell box or find a paper clip
  2. Remove Reset sticker at the back of dbell, please don’t throw the sticker, reuse it.
  3. Insert Reset Key or paper clip and Hold RESET button for 20sec.
  4. dbell HD+ will make announcement, Reset to default and restart.

Back To Top

SD app setup

SD app setup

Pair doorbell with Android® device

Connecting dbell to your Network, https://vimeo.com/dbellbell/dbell-for-android
Setup can be done two different ways:

Method A:

dbell-ethernet

  1. Connect dbell using LAN Cable to your Router
  2. Power dbell using supplied AC adapter, wait until you hear voice prompt from dbell
  3. Run dbell app
  4. Click ‘add doorbell’
  5. Click ‘Search
  6. Click ‘Search result ID Field’
  7. Click ‘’Done’
  8. Select Setup/Gear icon
  9. Select Wi-Fi Settings > Manage Network
  10. Select your Wi-Fi name from the list
  11. Enter your Wi-Fi password and click done

Now you can disconnect LAN cable from dbell. dbell is now ready for installation on your door. dbell will remember your Wi-Fi settings.

Method B:

  1. Press and Hold dbell call button until you hear the voice prompt ” Network Configuration Mode”
  2. Open device “Settings”
  3. Select “Wi-Fi”
  4. Select dbell SSID “BELL-XXXXXX”
  5. Enter password 123456789
  6. Press/Tap ‘Join’
  7. A check mark will confirm the connection, Exit Settings app
  8. Open the dbell app
  9. Press ‘Please click here to add doorbell’
  10. Type your preferred name for the smart doorbell,
  11. Press ‘Search’, Select search result
  12. Press ‘Done’
  13. If you can see ‘Online’, you are connected to your dbell. Press ‘Setup’/Gear icon to continue
  14. Select WiFi settings > Manage Network
  15. Select your Wi-Fi SSID name
  16. Enter your Home or Office Wi-Fi Password and press ‘Done’

Press the ‘doorbell name’ or where it says ‘online’ to see the camera, you will see the live view from the dbell camera

Step-1:‏ Press and Hold dbell call button for 5 seconds or until you hear the voice prompt
A001

2. Go to phone or tablet Settings

A003

3. Select Wi-Fi

A004

4. Select dbell SSID BELL-XXXXXX

A005

5. Enter password 123456789

A006

6. Press/Tap ‘Connect’

A007

7. dbell AP BELL-XXXXXX should say connected, exit settings

A008

8. Open the dbell app

A009

9. Press ‘click here to add doorbell’

A010

10. Type your preferred name for the smart doorbell, Press ‘Search’

A011

11. Select the doorbell from the Search Result window

A012

12. Press ‘Done’

A013

13. If you see the status is ‘Online’, you are connected to your dbell. Press ‘Gear icon’ to continue

A014

14. Select Manage WiFi Network

A015

15. Select your Wi-Fi SSID name

A016

16. Enter your Home or Office Wi-Fi Password and press ‘Done’

A017

17. Press the ‘doorbell name’ or where it says ‘online’ to see the camera

A018

18. You will see the live view from the doorbell camera

Back To Top