10. How to connect dbell HD Live to a NVR

The instructions are based on ONVIF compatible NVR. For your particular NVR it could be slightly different, but the process is similar to adding an IP camera to the NVR (Network Video Recorder)

  1. Find the dbell IP address, dbell app go to Setup >>Network info >> Write down the dbell IP address
  2. Go to your NVR add camera screen
  3. Authenticate to access NVR settings
  4. Select add IP camera
  5. Enter the dbell IP address found on STEP-1
  6. Select ONVIF protocol
  7. Use Port # 10080
  8. Press OK

dbell HD Live is added to your NVR.

NVR setup guide1=> Follow your NVR documentation for adding an IP camera to your NVR

>> If you find any issues setting up NVR, please don’t leave a comment as we can’t reply to you from your comment. Contact us via email to support@dbell.ca or call us 800 944 8218 or 905 582 8755 for help. It is truly easy to setup. Thaks

Was this article helpful?

Related Articles