6.5b Pair, Sync, set up, dbell SD with iPhone, iPad, iOS devices setup – Pictorial

Pair doorbell with iOS® device

dbell installation video for iOS® devices

dbell installation slide for iOS® devices

Connecting dbell to your Network

Method A:

dbell-ethernet

  1. Connect dbell using LAN Cable to your Router
  2. Power on dbell using supplied AC adapter, wait until you hear voice prompt from dbell
  3. Run dbell app
  4. Click ‘add doorbell’
  5. Click ‘Search’, select the search result
  6. Click ‘Done’ on the top right corner
  7. Select Setup/Gear icon
  8. Select Wi-Fi settings
  9. Select your Wi-Fi name from the list
  10. Enter your Wi-Fi password and click done

 

Now you can disconnect LAN cable from dbell. dbell is now ready for installation on your door. dbell will remember your Wi-Fi settings.

Method B:

  1. Press and Hold dbell call button until you hear the voice prompt “Network configuration mode”
  2. Open device Settings
  3. Select Wi-Fi
  4. Select dbell SSID BELL-XXXXXX
  5. Enter password 123456789
  6. Press/Tap ‘Join’
  7. A check mark will confirm the connection, Exit Settings app
  8. Open the dbell app
  9. Press ‘add’
  10. Type your preferred name for the smart doorbell,
  11. Press ‘Search‘, Select search result
  12. Press ‘Done
  13. If you can see ‘Online’, you are connected to your dbell. Press ‘Setup’/Gear icon to continue
  14. Select WiFi settings
  15. Select your Wi-Fi SSID name
  16. Enter your Home or Office Wi-Fi Password and press ‘Join’
  17. Press the ‘doorbell name’ or where it says ‘online’ to see the camera

 

dbell-1

1‏ Press and Hold dbell call button for 5 seconds or until you hear the voice prompt

 

dbell-002

2 Open device Settings

 

003

3 Select Wi-Fi

 

004

4 Select your Doorbell AP BELL-XXXXXX

 

005

5 Enter password 123456789

 

006

6 Press/Tap ‘Join’

 

007

7 A check mark will confirm the connectivity, Exit Settings app

 

dbell-008

8 Open the dbell app

 

009

9 Press ‘Please click here to add doorbell’

 

010

10 Type your preferred name for the smart doorbell

 

011

11 Press ‘Search’, select search result

 

012

12 Press ‘Done’

 

dbell-013

13 If you can see ‘Online’, you are connected to your doorbell. Press ‘Setup’ to continue

 

014

14 Select WiFi settings

 

015

15 Select your Wi-Fi SSID name

 

016

16 Enter your Home or Office Wi-Fi Password and press ‘Join’

 

dbell-017

17 Press the ‘doorbell name’ or where it says ‘online’ to see the camera

 

dbell-018

You will see the live view from the doorbell camera

 

 

dbell-019

Answering the call from your smartphone

 

Was this article helpful?

Related Articles