6.5a Pair, sync, set up, setup dbell SD with Android device – Pictorial

Pair doorbell with Android® device

Connecting dbell to your Network, full installation video

Method A:

dbell-ethernet

  1. Connect dbell using LAN Cable to your Router
  2. Power dbell using supplied AC adapter, wait until you hear voice prompt from dbell
  3. Run dbell app
  4. Click ‘add doorbell’
  5. Click ‘Search
  6. Click ‘Search result ID Field’
  7. Click ‘’Done’
  8. Select Setup/Gear icon
  9. Select Wi-Fi Settings > Manage Network
  10. Select your Wi-Fi name from the list
  11. Enter your Wi-Fi password and click done

 

Now you can disconnect LAN cable from dbell. dbell is now ready for installation on your door. dbell will remember your Wi-Fi settings.

Method B:

  1. Press and Hold dbell call button until you hear the voice prompt ” Network Configuration Mode”
  2. Open device “Settings”
  3. Select “Wi-Fi”
  4. Select dbell SSID “BELL-XXXXXX”
  5. Enter password 123456789
  6. Press/Tap ‘Join’
  7. A check mark will confirm the connection, Exit Settings app
  8. Open the dbell app
  9. Press ‘Please click here to add doorbell’
  10. Type your preferred name for the smart doorbell,
  11. Press ‘Search’, Select search result
  12. Press ‘Done’
  13. If you can see ‘Online’, you are connected to your dbell. Press ‘Setup’/Gear icon to continue
  14. Select WiFi settings > Manage Network
  15. Select your Wi-Fi SSID name
  16. Enter your Home or Office Wi-Fi Password and press ‘Done’

Press the ‘doorbell name’ or where it says ‘online’ to see the camera, you will see the live view from the dbell camera

Step-1:‏ Press and Hold dbell call button for 5 seconds or until you hear the voice prompt

A001

2. Go to Device Settings

3. Select Wi-Fi

A003

4. Select dbell SSID BELL-XXXXXX

A004

 5 Enter password 123456789

A005

6 Press/Tap ‘Connect’

A006

7 dbell AP BELL-XXXXXX should say connected, exit settings

A007

8 Open the dbell app

A008

9 Press ‘click here to add doorbell’

A009

A010

11 Select the doorbell from the Search Result window

A011

12 Press ‘Done’

A012

13 If you see the status is ‘Online’, you are connected to your dbell. Press ‘Gear icon’ to continue

A013

14 Select Manage WiFi Network

A014

15 Select your Wi-Fi SSID name

A015

16 Enter your Home or Office Wi-Fi Password and press ‘Done’

A016

17 Press the ‘doorbell name’ or where it says ‘online’ to see the camera

A017

18 You will see the live view from the doorbell camera

A018

Was this article helpful?

Related Articles